Satisfactory Wiki
Register
Advertisement

Pipeline Supports are logistic structures used to support Pipelines.

All kinds of Supports allow a Pipeline to be attached to it from both sides. Pipelines keep on working even if the Supports supporting them are dismantled.

Types[]

Type Unlocked at Cost Properties
Pipeline Support Pipeline Support Tier 3 - Coal Power 2× Iron Plate Iron Plate
2× Concrete Concrete
Default Support used while constructing Pipelines.
Adjustable height from 1 to 7 meters in 2-meter increments. Can be also tilted.
Stackable Pipeline Support Stackable Pipeline Support Tier 4 - Logistics Mk.3 4× Iron Plate Iron Plate
2× Iron Rod Iron Rod
2× Concrete Concrete
Stackable Support that has a ladder on both sides. Can be stacked indefinitely.
Ground Pole is 4 m tall, all stacked ones 2 m.
Compatible with other types of stackable logistic supports.
Pipeline Wall Support Pipeline Wall Support AWESOME Shop - Pipeline Wall Attachments 2× Iron Rod Iron Rod
1× Iron Plate Iron Plate
2× Concrete Concrete
Attaches to the sides of Walls and Foundations only.
Pipeline Wall Hole Pipeline Wall Hole AWESOME Shop - Pipeline Wall Attachments 2× Iron Rod Iron Rod
1× Iron Plate Iron Plate
2× Concrete Concrete
Attaches to Walls only. Allows Pipelines to pass through the Wall.
Pipeline Floor Hole Pipeline Floor Hole AWESOME Shop - Pipeline Floor Hole 2× Iron Rod Iron Rod
2× Iron Plate Iron Plate
2× Concrete Concrete
Attaches to Foundations only. Allows Pipelines to pass through the Foundation.

Construction[]

Standard Pipeline Supports are built by clicking (Left) once to set the location, then scrolling to rotate (or Ctrl angle) and looking up or down to change the height (if desired), confirming the placement by clicking again. If the "Execute Build Step on Release" option is enabled, Left has to be held down to adjust the rotation and height while placing.

Stackable Pipeline Supports are built simply by placing them on the ground, on each other or other kinds of stackable supports. It's not possible to make them the default type of Supports used when building Conveyor Belts.

Pipeline Wall Supports can only be built on Walls and on the sides and ceilings of Foundations, as mentioned above. Pipeline Wall Holes can be built on Walls and serve the same purpose as Conveyor Walls, but can be placed anywhere on the Wall, making them much more modular.

Gallery[]

History[]

  • Patch 0.5.0.0: Introduced Pipeline Floor Hole
  • Patch 0.3.6: Wall attachments can now be placed under and on the side of Foundations
  • Patch 0.3.3.2: Stackable Poles can no longer be placed inside of each other
  • Patch 0.3.2.0: Different stackable poles can now be stacked with each other
  • Patch 0.3:
    • Normal and stackable supports introduced
    • Pipeline Supports height and rotation can now be tweaked when building them from a Pipeline

See also[]


Advertisement