Satisfactory Wiki
Advertisement

Conveyor Lifts are structures used to transport items between buildings or floors. They are the vertical counterpart to Conveyor Belts. Unlike belts, they can exist standalone.

Characteristics[]

Just like Conveyor Belts, once a Conveyor Lift is connected to a building, it will begin to pull items out from the building's output slot or attempt to push items into its input slot. Items on lifts cannot be picked up nor manually dispensed onto one.

If the lift cannot output its items, the items will back up in it.

Each mark has higher throughput (measured in items/min) than its predecessor, and also appears more visually advanced.

Mark Items/min Speed
difference
Mk.1 lift
equivalent
Visual appearance Unlocked at Ingredients
Mk.1 60 N/A 1 Conveyor Lift Mk.1 Slim and thin. Three small LEDs every two meters. Tier 1 - Logistics Iron PlateIron Plate
Mk.2 120 2 Conveyor Lift Mk.2 Slightly thicker. Single but bigger LED. Tier 2 - Logistics Mk.2 Reinforced Iron PlateReinforced Iron Plate
Mk.3 270 2.25× 4.5 Conveyor Lift Mk.3 Thicker appearance. Two bar LEDs. Tier 4 - Logistics Mk.3 Steel BeamSteel Beam
Mk.4 480 1.77778× 8 Conveyor Lift Mk.4 Thicker appearance. Added a guardrail. Single large bar LED. Tier 6 - Expanded power Infrastructure Encased Industrial BeamEncased Industrial Beam
Mk.5 780 1.625× 13 Conveyor Lift Mk.5 Additional back structural support. Single large bar LED. Tier 7 - Logistics Mk.5 Alclad Aluminum SheetAlclad Aluminum Sheet

Construction[]

Tall Conveyor Lift

When built between 2 Conveyor Lift Floor Holes, the height limit of 48 meter can be bypassed. A 200 meter tall lift (right) compared to a 48 meter tall lift (left).

The building of a lift always starts with its starting point, i.e. the point objects are being transported from, and ends with its ending point. during construction, pressing 'R' to change the build mode will reverse the lift's direction.

  • The height of one lift is limited to 48 meters, however, multiple lifts can be attached to each other, allowing for theoretically infinitely tall lift chains.
  • Conveyor lift which built between 2 Conveyor Lift Floor Holes can bypass the 48 meter limit, granting it infinite vertical height (which is then limited by world's height of 2.247km).

The rotation of the 'head' can be changed by scrolling Middle. Use mouse movement to change its height - it can go up or down in increments of one meter. The minimum vertical distance is four meters and the maximum is 48 meters. Similar to Conveyor Belts, Conveyor Lifts can be upgraded in-place.

Connectivity[]

To check a Conveyor Lift's connectivity, look at the shape of its flexible connectors:

Conveyor Lift Connectivity

Blue: The connector flexes out, indicating it is connected. Red: The connector retracts, showing no connection

  • The Conveyor Lift must be built after the structure it is connected to. For example, building a Conveyor Splitter after building the lift will not work. Otherwise, small belts may be used to connect the lifts.
  • Conveyor Lifts can be built in-between a Splitter and a machine (eg, Assembler) directly, without the need for a short belt, provided the distances in-between are correct. The Nuclear Power Plant is an exception, as the input and output are both offset by half a meter in relation to Foundation grids, making it impossible to align the gap with Splitters. A short belt is required in this case.
  • The starting point of the lift snaps to an existing Belt, but the ending point does not ("Encroaching others clearance"). In either case, the flexible connector appears to be retracted.

Tips[]

  • Power Poles can be placed on the end segments of lifts.

Gallery[]

History[]

See also[]


Advertisement