Pipeline Support

From Satisfactory Wiki
Jump to: navigation, search
Pipeline Support
Pipeline Support.png
Can be used as a connection for pipelines. The height of the support can be adjusted. Useful to route pipelines in a more controlled manner and over long distances.
Unlocked at Tier 3 - Coal Power
Category Logistics
Subcategory Pipeline Supports
Dimensions
Width 2 m
Length 1 m
Height (1/3/5/7)+2 m
Required Items
Iron Plate.png
2
Concrete.png
2
Stackable Pipeline Support
Stackable Pipeline Support.png
Supports for pipelines. Can be stacked on other stackable supports.
Unlocked at Tier 4 - Logistics Mk.3
Category Logistics
Subcategory Pipeline Supports
Inputs 1
Outputs 1
Dimensions
Width 1 m
Length 2 m
Height Stackable: (2n+2) m
Required Items
Iron Plate.png
4
Iron Rod.png
2
Concrete.png
2

The Pipeline Support is a logistics building used to support and route Pipelines over long distances.

The Stackable Pipeline Support is a building used to stack the Pipeline Support. It acts the same as the Stackable Hyper Tube Support and Conveyor Pole Stackable, infinitely stackable and is compatible to stack on any of the other stackable supports, see images below.

Stackable Supports[edit | edit source]

As mentioned previously, all stackable supports are compatible with each other, they also have the ability to collide and work functionally, what otherwise shouldn't be allowed is possible with the stackable supports.

From left to right is the Stackable Hyper Tube, Pipeline, then Conveyer.
As seen in this photo the stackable supports can collide and nest within each other while remaining functional.
Top to bottom is Stackable Hyper Tube, Conveyer, then Pipeline.

Construction[edit | edit source]

Pipeline Support[edit | edit source]

  • Its horizontal angle can be changed by scrolling. After choosing the location, its height can be increased by looking up or down and its vertical angle by scrolling.
  • A Pipeline Support is needed for every 100 meters of Pipeline, however it can be deconstructed and yet a new Pipeline can be snapped to the tube without the support.
    • A Pipeline can meet the 100 meter requirement by using a Stackable Pipeline Tube Support instead

History[edit | edit source]

Gallery[edit | edit source]

See also[edit | edit source]